enzo/izcontrol
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update 'readme.md'

Browse Source
This commit is contained in:
enzo
2022-12-06 17:46:34 +01:00
parent 8f10440d02
commit adaed3f98f
1 changed files with 20 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
readme.md
View File

@@ -1,2 +1,21 @@
#IzControl# #IzControl
IzControl is an application that makes is possible to easily control appliances over the network using UDP, telnet and other protocols. IzControl is an application that makes is possible to easily control appliances over the network using UDP, telnet and other protocols.
##Example setup on Raspberry Pi
1. Download the [Raspberry Imager](https://www.raspberrypi.com/software/) tool and flash the SD card with the default Raspbian Image
1. Hook the Pi to a monitor and a keyboard.
1. Insert the SD card into the Raspberry Pi and power it up.
1. Go trough the setup (you can skip the network and language setups), then the system will reboot. For this example, the username will be control and the password raspicontrol
1. Open terminal to install desired software run the following
sudo apt install nginx php-fpm composer git -y
cd /var/www && sudo rm -rf html
sudo git clone https://gitea.linkensphere.com/enzo/izcontrol.git html
cd html
sudo cp defaultconf /etc/nginx/sites-enabled/default
sudo chown -R www-data:www-data html
sudo nginx -s reload
At this point, you should see the control panel on the local of Pi (run ifconfig to see the ip addres)
Optionally you can
- run the above in a remote shell, in order to to do this go to the start menu > Preferences > Raspberry Pi Configuration . Now click on Interfaces and click enable next to SSH and click OK .
- Remove the desktop environment, in Menu > Preferences > Raspberry Pi configuration > System > Boot, select **To CLI**, then reboot. The PI will use less memory. If you want to re-enable desktop, just run sudo raspi-config on the terminal and you can find it under system.